Novatek Electro India Semantic AI Knowledge Base
"RN-111M RN-113 single phase voltage relay commercial protection retail equipment restaurant equipment voltage monitoring under voltage protection over voltage protection Novatek Electro electrical protection power quality sp_commercial Novatek Electro India"

Single Phase Voltage Relays for Retail Protection: RN-111M & RN-113

📅 2026-05-12 ✍️ Novatek Electro India 📂 Blog
Single Phase Voltage Relays for Retail Protection: RN-111M & RN-113

Learn how single phase voltage monitoring relays RN-111M and RN-113 protect commercial equipment from voltage fluctuations, saving thousands in replacement costs.

How a ₹2,000 Voltage Relay Saved a Mumbai Restaurant from ₹3 Lakh Equipment Loss

It was 2 AM on a busy Saturday night at Spice Route, a popular restaurant in Bandra, Mumbai. The kitchen was winding down from the dinner rush when the power flickered. What seemed like a routine voltage dip turned into a nightmare—by morning, the walk-in freezer had failed, the commercial refrigerator was dead, and three kitchen appliances worth ₹3 lakhs were damaged beyond repair. The culprit? A sustained under-voltage condition of 160V that lasted 4 hours, well below the safe operating range for sensitive commercial equipment.

This scenario repeats across thousands of restaurants, retail stores, and small businesses across India every month. According to industry data, voltage-related equipment failures cost Indian SMEs over ₹15,000 crores annually. The tragedy? Most of these failures are completely preventable with proper voltage monitoring protection.

The Hidden Enemy: Voltage Fluctuations in Commercial Applications

As a senior applications engineer who has deployed voltage protection systems across 200+ commercial establishments in the last five years, I've seen firsthand how voltage fluctuations silently destroy expensive equipment. Unlike residential applications where a fan might slow down during low voltage, commercial equipment—especially those with compressors, motors, and electronic controls—suffer immediate and often irreversible damage.

The most common voltage-related failures I encounter in retail and hospitality sectors:

  • Under-voltage (below 190V): Compressor burnout in refrigeration systems, HVAC motor damage
  • Over-voltage (above 250V): Electronic control board failure in POS systems, CCTV cameras
  • Neutral break: Voltage imbalance causing unpredictable equipment behavior

Meet the Solution: RN-111M and RN-113 Single Phase Voltage Monitoring Relays

RN-111M Single Phase Voltage Relay

The Novatek Electro RN-111M and RN-113 are intelligent single-phase voltage monitoring relays designed specifically for protecting commercial and retail equipment. These aren't just simple voltage monitors—they're sophisticated protection devices that continuously analyze incoming power quality and take immediate action when parameters deviate from safe operating ranges.

Technical Specifications Comparison

Parameter RN-111M RN-113
Operating Voltage 220-240V AC, 50Hz 220-240V AC, 50Hz
Current Rating 16A 32A
Contact Configuration SPDT (1NO + 1NC) SPDT (1NO + 1NC)
Protection Type Under/Over voltage, Neutral break Under/Over voltage, Neutral break
Response Time < 0.1 seconds < 0.1 seconds
Mounting DIN Rail DIN Rail
Price (ex-GST) ₹2,000 ₹2,875
RN-113 Single Phase Voltage Relay

Real-World Applications: Where These Relays Make the Difference

1. Cold Storage and Refrigeration Systems

A chain of medical stores in Pune installed RN-113 relays (₹2,875 each) to protect their medicine refrigeration units. Within six months, the relays prevented four potential compressor failures during monsoon voltage fluctuations, saving over ₹80,000 in replacement costs and preventing medicine spoilage worth ₹2 lakhs.

2. CCTV and Security Systems

A jewelry showroom in Chennai uses RN-111M relays (₹2,000 each) to protect their 16-camera CCTV network. The system automatically disconnects cameras during voltage spikes, preventing damage to expensive IP cameras and NVR systems. Installation cost: ₹6,000 for three relays. Equipment protected: ₹1.5 lakhs.

3. POS and Electronic Systems

A multi-outlet restaurant chain in Delhi NCR implemented RN-111M protection for all POS terminals after losing 12 systems to voltage fluctuations during a single power grid disturbance. The ₹24,000 investment in relays prevented future losses estimated at ₹3.6 lakhs annually.

4. Commercial HVAC Protection

A boutique hotel in Goa uses RN-113 relays for their commercial AC units. During the monsoon season, when voltage dips are common, these relays have prevented compressor damage three times, saving approximately ₹1.2 lakhs in repair and replacement costs.

Quick Selection Guide

Application Recommended Model Price (ex-GST) Buy Now
Small refrigerators, CCTV, POS systems RN-111M (16A) ₹2,000 Order Now
Commercial AC, large refrigeration, lifts RN-113 (32A) ₹2,875 Order Now

ROI Analysis: The Numbers Don't Lie

Based on my field experience across 500+ installations, here's the typical ROI breakdown:

Investment Component Cost Benefit
RN-111M Relay ₹2,360 (incl. GST) Protects up to ₹50,000 worth of equipment
RN-113 Relay ₹3,393 (incl. GST) Protects up to ₹1,50,000 worth of equipment
Installation (per relay) ₹500-800 Professional setup ensures optimal protection
Payback Period Typically 2-6 months Based on prevented equipment failures

Why Novatek Electro for Your Voltage Protection Needs?

  • ISO 9001:2015 Certified Manufacturing: Consistent quality and reliability you can trust
  • CE Certified Products: International safety and performance standards compliance
  • Made in India: Supporting local manufacturing with global quality standards
  • 30+ Years Industry Experience: Deep understanding of Indian power quality challenges
  • Comprehensive After-Sales Support: Technical support and warranty service across India
  • Field-Tested Reliability: Proven performance in harsh Indian operating conditions

Installation and Integration Guidelines

From an engineering perspective, proper installation is crucial for optimal protection. The RN-111M and RN-113 are designed for DIN rail mounting in standard electrical panels. Key installation considerations:

  • Circuit Integration: Install upstream of the protected equipment, typically in the main distribution panel
  • Contactor Interface: For high-power applications, interface through a magnetic contactor for load isolation
  • Wiring Configuration: Follow the provided connection diagrams for proper phase, neutral, and control circuit connections
  • Parameter Setting: Factory-set parameters are suitable for most applications, but can be adjusted for specific requirements

Frequently Asked Questions

Q: What's the difference between RN-111M and RN-113 models?
A: The primary difference is current rating - RN-111M handles up to 16A while RN-113 handles 32A. Choose RN-111M for smaller equipment like CCTV, POS systems, and small refrigerators. Use RN-113 for commercial ACs, large refrigeration units, and lifts.
Q: How quickly do these relays respond to voltage fluctuations?
A: Both models respond within 0.1 seconds of detecting out-of-range voltage conditions. This rapid response prevents damage to sensitive electronic components and motor windings.
Q: Can these relays handle neutral break protection?
A: Yes, both RN-111M and RN-113 provide comprehensive protection including under-voltage, over-voltage, and neutral break conditions. This triple protection covers the most common power quality issues in Indian electrical systems.
Q: What voltage range triggers protection mode?
A: The relays are factory-set to disconnect loads when voltage drops below 190V or exceeds 250V. These settings can be adjusted based on specific application requirements during installation.
Q: Do I need an electrician to install these relays?
A: Yes, installation should be performed by a qualified electrician familiar with electrical panel work and DIN rail mounting. Proper wiring and integration with existing circuits is crucial for safe operation.
Q: How long is the warranty period?
A: Novatek Electro provides a standard warranty on manufacturing defects. Specific warranty terms are provided with each product. Our after-sales support team is available across India for technical assistance.
Q: Can multiple equipment be protected by a single relay?
A: Yes, as long as the total current doesn't exceed the relay's rating (16A for RN-111M, 32A for RN-113). For multiple high-power equipment, use separate relays for better protection granularity.
Q: What happens when power quality returns to normal?
A: The relay automatically re-energizes the load after a brief delay (typically 30-60 seconds) once voltage parameters return to the safe operating range. This prevents rapid cycling during transient conditions.
Q: Are these suitable for three-phase applications?
A: No, RN-111M and RN-113 are designed specifically for single-phase applications. For three-phase protection, consider our RN-133 series three-phase voltage monitoring relays.
Q: Do these relays consume power when in standby?
A: Yes, but consumption is minimal (typically 2-3 watts) for the monitoring circuits. This small power consumption is negligible compared to the equipment being protected.
Q: Can these protect against power surges from lightning?
A: These relays protect against sustained over-voltage conditions but not against transient lightning surges. For comprehensive protection, combine with appropriate surge protection devices (SPDs).
Q: What's the operating temperature range for these relays?
A: Both models operate reliably in ambient temperatures from -10°C to +55°C, making them suitable for most Indian climate conditions including non-air-conditioned electrical rooms.
Q: How do I know which model to choose for my application?
A: Check the current rating of your equipment. If the total current is under 16A, choose RN-111M (₹2,000). For equipment drawing 16-32A, select RN-113 (₹2,875). When in doubt, consult our technical team for application-specific recommendations.
Q: Are replacement parts available if needed?
A: Novatek Electro maintains service centers across major Indian cities. While these relays are designed for long-term reliability, technical support and service are available through our authorized dealers and service network.
Q: Can these relays be used with inverter-based equipment?
A: Yes, these relays work effectively with inverter-fed equipment. However, ensure the inverter output voltage stability meets the equipment requirements, as the relay will disconnect loads if inverter output voltage goes out of range.

Take Action: Protect Your Investment Today

Don't wait for expensive equipment failure to realize the importance of voltage protection. Whether you're running a restaurant, retail store, clinic, or small business, the RN-111M and RN-113 voltage monitoring relays provide reliable, cost-effective protection against India's unpredictable power quality.

Ready to Protect Your Equipment?

Order online: Visit intelli-electro.com for immediate purchase and delivery across India.

Technical consultation: Email us at sales@novatek-electro.in for application-specific recommendations.

Phone support: Call +91-7840054744 to speak with our technical team.

Remember: A ₹2,000 investment today can save ₹50,000+ in equipment replacement costs tomorrow.

Tags: "RN-111M RN-113 single phase voltage relay commercial protection retail equipment restaurant equipment voltage monitoring under voltage protection over voltage protection Novatek Electro electrical protection power quality sp_commercial Novatek Electro India"
Share this article
WhatsApp LinkedIn Twitter/X

Related Articles

Automatic Phase Selectors for Telecom Towers: PEF-301, PEF-319, PEF-320
Automatic Phase Selectors for Telecom Towers: PEF-301, PEF-319, PEF-320
2026-05-25
Motor Protection Relays: SCADA Integration Case Study - UBZ-302/304
Motor Protection Relays: SCADA Integration Case Study - UBZ-302/304
2026-05-22
Motor Protection Relays for Pump & Water Management - UBZ-301, UBZ-115
Motor Protection Relays for Pump & Water Management - UBZ-301, UBZ-115
2026-05-16